Tips on how to use Ford VCM II-CFR to record data stream

VCM II Buyer Flight Recorder (CFR) Cable (VP-2) is created for Ford VCM II diagnostic technique which supplies far better efficiency for technicians when diagnosing.

VCM II-CFR Outlook:

VCM II-CFR Connection:

1) VCM2-CFR connection
Right after download and install CFR application, let's get down to connecting the CFR interface with vehicle and Ford VCM 2 unit.

NOTE: This interface must only be applied by appropriately educated technician.

Step 1: Connect the VP-2, Pedant cable towards the VCM2-CFR
Step 2: Various vehicle may call for diverse replacement direction Ordinarily, insert the VCM2 CFR interface around the front floor region on the automobile or under the front passenger seat But make certain CFR does not come to be entangled together with the driver and car controls…
Step 3: When connecting DLC to the vehicle, route cable above column as shown picture under.

Step 4. Connect the VCM2 CFR using the VCM2 principal unit

2) Record information stream
Step 1: Drive car as normal and make sure each indicator lights around the VCM II - CFR Pendant are strong ON VCM II - CFR will not record information if Pendant lights will not be strong ON In the event the Pendant lights are OFF Press Trigger Button on.. Pendant to wake up device and activate lights.
Step 2: Press Pendant Trigger Button when car exhibits buyer complaint (s).
Step three: A recording will automatically commence once auto-trigger condition has been met.
Recorded data is going to be retained by the VCM II - CFR until it is o or the Auto Diagnostic Tools user selects VCM II CFR Setup